|
| |
IPS Vertical Conveyor Modules
Spare Parts Listing
Call our Spare Parts Order Desk at (435) 586-1188 for pricing
and availability.
To order parts, please have the following information available when you call:
 | Serial number |
| Part number |
| Description of the part |
| A company purchase order number |
New customers may apply for an IPS account by faxing 3 trade references and 1 bank
reference to (435) 867-0815, to the attention of the IPS Spare Parts Order Desk.
Abbreviations:
| CL |
Close or close nipple |
| CPVC |
Chlorinated Polyvinyl Chloride |
| EPDM |
Ethylene Propylene Diene Monomer |
| GPM |
Gallons per minute |
| ID |
Inside dimension |
| I/C |
Inter-Connect |
| KVA |
Kilovolt Ampere |
| NC |
Normally Closed |
| NO |
Normally Open |
| NPT |
National Pipe Thread |
| OD |
Outside Dimension |
| PP |
Polypropylene |
| PR |
Pinch Roller |
| PSI |
Pounds per square inch |
| PVC |
Polyvinyl Chloride |
| SS |
Stainless Steel |
| UHMW |
Ultra High Molecular Weight-Polyethylene |
| UNC |
Unified National Coarse |
| VAC |
Volts Alternating Current |
| Item No. |
Item Name |
Type/Size |
| Dryer Parts |
| 00447 |
Air Knife |
24" Dryer |
| 01838-01 |
Air Knife |
30" S/S |
| 02617-02 |
Dryer O Ring |
24" |
| 02617-03 |
Dryer O Ring |
24" Buna |
| 01121 |
Filter |
for Blower #01120 |
| 01383 |
Filter Element |
for Blower #01120 |
| Camac Pumps Used with Baldor Motor #11581 (3" inlet,
2" outlet) |
| 11582-03 |
Camac Pump |
Stainless, 3 HP |
| 11582-01 |
Camac Pump |
Stainless, 5 HP |
| 11582-04 |
Camac Pump |
Stainless, 7-1/2 HP |
| 11582-05 |
Camac Pump |
Titanium, 3 HP |
| 11582-02 |
Camac Pump |
Titanium, 5 HP |
| Baldor Motors used with Camac Pumps #11582 |
| 11581-01 |
Baldor Motor |
3 HP |
| 11581-02 |
Baldor Motor |
5 HP |
| 11581-03 |
Baldor Motor |
7-1/2 HP |
| Hardware |
| 01805 |
Gasket Extrusion |
Used on Chamber Lid, P shaped Vinyl |
| 11828 |
Penguin Filter Chamber |
12 10" Cartridges, 2-1/2" Od
(Note: When ordering filter tubes, specify micron rating 1, 3, 5, 10, 20, 30, 50 and 75) |
| 08532 |
Rotractor Spring |
Retractable Spring Plunger |
| 06682-03 |
Set Screw |
Titanium, ¼-20 x ½ |
| 02715-02 |
Set Screw |
Stainless Steel, ¼-20 x ½ |
| 11690 |
Thumb Screw |
PVC, ¼ |
| Conveyor |
| 00040-01 |
Worm |
Polyethylene |
| 00040-02 |
Worm |
316 S/S |
| 00040-03 |
Worm |
Titanium - Discontinued, use 00040-06 |
| 00040-06 |
Worm |
Kynar |
Explanation of Worms:
Polyethylene worms are used on conveyors. Kynar, stainless steel and titanium are used on
pinch rollers. |
| 02015 |
Bushing End Panel |
UHMW Flange Bushing w/2 screw holes |
| 00042-01 |
Coupling, Drive Shaft S/S |
|
| 00042-02 |
Coupling, Drive Shaft |
Titanium |
| 00042-03 |
Coupling, Drive Shaft |
Hastalloy |
| 06355-01 |
Pins, Conveyor Shaft |
Titanium |
| 06355-02 |
Pins, Conveyor Shaft |
S/S |
| Shafts |
| Replacement shafts are available upon request. When placing
an order for shafts, please provide the serial number for the machine and the shaft or
chamber length, and type of material. |
| 00039 |
Bearing |
For drive shaft |
| 00057 |
Bearing |
For pinch roller |
| 05756 |
Bevel Gear |
Used on Thin Film Drive |
| 00996 |
Brush Holder Cap |
Fits Met motors only |
| 01732-01 |
Conveyor Shaft |
S/S, Used with Conveyor Wheels |
| 01732-02 |
Conveyor Shaft |
Titan, Used with Conveyor Wheels |
| 01733-01 |
Conveyor Wheel |
2" |
| 01733-02 |
Conveyor Wheel |
1" |
| 01733-03 |
Conveyor Wheel |
2" Neoprene |
| 01733-04 |
Conveyor Wheel |
1" Neoprene |
| 01733-06 |
Conveyor Wheel |
1" Viton |
| 11819-01 |
Coupling, Drive |
Stainless Steel, Quick Release Type, Male Universal |
| 11819-02 |
Coupling, Drive |
Titanium, Quick Release Type, Male Universal |
| 02791-01 |
Drive Washer |
Stainless Steel |
| 02791-02 |
Drive Washer |
Titanium |
| 11823-01 |
Female Left |
Stainless Steel, Counter Clockwise Lock |
| 11823-02 |
Female Left |
Titanium, Counter Clockwise Lock |
| 00901 |
Flange Ball Bearing |
Pillow Block |
| 00947 |
Flange Cover |
Cover for Pillow Block |
| 01106-03 |
Gearmotor |
1/4 Hp, 90 In-Lbs Torque, 2.8 Amps, 90V, 165 RPM |
| 00997 |
Gearmotor Brush |
Fits Met motors only |
| 03001-01 |
Guide Wire |
S/S 316, .020, approx. 935' at 1 pound spool |
| 03001-02 |
Guide Wire |
S/S .032, approx. 365' at 1 pound spool |
| 00048 |
Helical Gear |
1/4" Bore |
| 00056 |
Helical Gear |
1/2" Bore, Used on Pinch Rollers |
| 11670 |
Lower Bearing, Thin Film |
1/2" thick |
| 08259 |
Lower Bearing, Thin Film |
1" thick |
| 00931-02 |
Master Link for Roller Chain |
|
| 00832 |
Motor Mount |
SS, U-Shaped |
| 03373 |
O Ring, Cut |
Fits worm |
| 00058-01 |
O Ring, Pinch Roller |
2-1/4" ID EPDM |
| 00058-01 |
O-Ring |
Used with Pinch Roller Bearings |
| 02693 |
O-Ring |
Spring, Used with Pinch Roller Bearings |
| 021617-02 |
O-Ring |
Dryer, 24" |
| 03373 |
O-Ring |
Cut, Used with Worm Gear |
| 11753-01 |
O-Ring |
Manifold EPDM, ID 1-3/8", OD 1-5/8", W 1/8" |
| 00052 |
Pinch Roller, Grooved |
24" Stainless Steel, 9 grooves |
| 01825 |
Pinch Roller, Grooved |
30" Stainless Steel, 11 grooves |
| 01810 |
Pinch Roller, Ungrooved |
24" Titanium |
| 02584 |
Pinch Roller, Ungrooved |
24" Stainless Steel |
| 02584-03 |
Pinch Roller, Ungrooved |
24" Hastalloy |
| 01823 |
Pinch Roller, Ungrooved |
30" Stainless Steel |
| 00907-01 |
Roller Chain |
#25, sold per foot |
| 01679 |
Spacer |
Conveyor, 1/4" bore |
| 00789 |
Spacer |
Drive Shaft, 1/2" x 1/2" |
| 00054 |
Spacer |
Pinch Roller Short, 1-1/8" |
| 00055 |
Spacer |
Pinch Roller Long, 2-1/8" |
| 00873 |
Speed Indicator Mount L-Shaped |
|
| 00645 |
Speed Pick Up Gear |
5/8" Bore |
| 02693 |
Spring O Ring |
Stainless Steel |
| 01011-02 |
Sprocket |
1/2" Bore |
| 01012-02 |
Sprocket |
5/8" Bore |
| 01294 |
Spur Gear, 15 Tooth |
Used on top of Pinch Roller |
| 01233-03 |
String Guide |
Nonmetallic, 500' Spool |
| 05773 |
Tygon Disks Thin Film 2-1/2" |
|
| 02978-02 |
Wheel Webbing |
Used on 2" Conveyor Wheel #01733-01 and -03 |
| 00043-02 |
Worm Pin |
Fits worm |
| Electrical |
| 08706 |
Float Switch |
Make on Rise |
| 08706-01 |
Float Switch |
Break on Rise |
| 0533-01 |
Lamp for Operator |
6 Volt Switch |
| |
Level Probes |
Special order item. Provide length of probe and type of material. |
| 00396 |
Level Relay |
10-pin, external mounted coil, plugs into 11-pin socket #050279 |
| 00763 |
Magnet - Cover Interlock |
|
| 00765 |
Magnet Connector |
for Part No. 00765 |
| 00765 |
Magnetic Sensor |
|
| 11680 |
Ratemeter |
Scaler Range .001-9999 |
| 00764 |
Reed Switch |
|
| 01107 |
Speed Board Control |
DC Power Supply for Drive Motor |
| 00529 |
Transformer |
6V |
| Parts for Operator Switches |
| 01230 |
Bezel |
Standard Square Black |
| 01863 |
Bezel |
Black Square with Round Hole |
| 00542 |
Contact Tool |
Used to remove contact blocks |
| 00530 |
Contact for Operator |
Type NO, Green Switch |
| 00531 |
Contact for Operator |
Type NC, Red Switch |
| 00532 |
Lamp Holder for Operator Switch |
Type 18, Short |
| 01130 |
Lamp Holder for Operator Switch |
Type 19, Long |
| 01287-01 |
Lens |
Red |
| 01287-02 |
Lens |
Green |
| 01287-04 |
Lens |
Amber |
| 01228 |
Lens Cover |
Clear (Use with Illuminated Buttons) |
| 01219 |
Lens Retainer |
|
| 01346 |
Mushroom Button |
|
| 00534 |
Operator Alternate Action Switch |
|
| 00762 |
Operator Momentary Switch |
|
| 01345 |
Operator Push-Pull Switch |
|
| 01229 |
Pilot Lens Cover |
Clear (Use with Pilot Lights) |
| |
Printed Marking Plate Switch Cover Legends |
When placing an order, supply switch cover name |
| 00543 |
Square Lens Tool |
Used for tightening the locking nuts inside of square bezel |
| Heaters, L Shaped |
| 03084-01 |
3 Phase 240 Volt |
304 S/S |
| 03084-02 |
3 Phase 480 Volt |
304 S/S |
| 03084-03 |
3 Phase 240 Volt |
Titanium |
| 03084-04 |
3 Phase 480 Volt |
Titanium |
| 03084-05 |
3 Phase 240 Volt |
316 S/S |
| 03084-06 |
3 Phase 480 Volt |
316 S/S |
| 03084-07 |
3 Phase 208 Volt |
316 S/S |
| 03084-08 |
3 Phase 208 Volt |
Titanium |
| Temperature Controls |
| Digital Temperature Control Part No. 00374 & 00375 are
obsolete, Temp Control has digital readout |
| Size |
CPVC
Sched 40
Part No. |
PVC
Sched 40
Part No. |
Description |
| 1/2" |
01167-01 |
11697 |
Cap Socket |
| 3/4" |
01167-02 |
-- |
Cap Socket |
| 1" |
01167-03 |
-- |
Cap Socket |
| 1-1/2" |
01167-05 |
-- |
Cap Socket |
| 2" |
01167-07 |
10305 |
Cap Socket |
| 3" |
-- |
10306 |
Cap Socket |
| 4" |
-- |
11587 |
Cap Socket |
| Size |
Polypro
Part No. |
PVC
Part No. |
Description |
| 1/4" |
00683-01 |
14398 |
Coupling, Threaded |
| 1/2" |
00683-02 |
-- |
Coupling, Threaded |
| 3/4" |
00683-03 |
14399 |
Coupling, Threaded |
| 1" |
00683-04 |
01175-01 |
Coupling, Threaded |
| 1-1/2" |
00683-07 |
01175-02 |
Coupling, Threaded |
| 2" |
00683-05 |
01175-03 |
Coupling, Threaded |
| Size |
PVC
Part No. |
CPVC
Part No. |
Description |
| 1/2" |
01174-01 |
01086-02 |
Elbow, 90 Degree Socket |
| 3/4" |
01174-02 |
01086-03 |
Elbow, 90 Degree Socket |
| 1" |
01174-03 |
01086-07 |
Elbow, 90 Degree Socket |
| 1-1/2" |
01174-05 |
01086-06 |
Elbow, 90 Degree Socket |
| 2" |
01174-09 |
01086-04 |
Elbow, 90 Degree Socket |
| Size |
Polypro
Part No. |
CPVC
Part No. |
Description |
| 1/2" |
01194-02 |
01168-01 |
Elbow, 45 Degree Threaded |
| 3/4" |
01194-03 |
01168-02 |
Elbow, 45 Degree Threaded |
| 1" |
01194-04 |
01168-03 |
Elbow, 45 Degree Threaded |
| 1-1/2" |
01194-06 |
01168-05 |
Elbow, 45 Degree Threaded |
| Size |
PVC
Sched 40
Part No. |
|
Description |
| 1/2" |
10700 |
|
Coupling, Socket |
| 1-1/4" |
10703 |
|
Coupling, Socket |
| 1-1/2" |
11694 |
|
Coupling, Socket |
| 4" |
11652 |
|
Coupling, Socket |
| Size |
Polypro
Part No. |
PVC
Part No. |
CPVC
Part No. |
Description |
| 1/4" |
00936-10 |
01195-01 |
-- |
Plug, Threaded |
| 3/8" |
00936-11 |
01195-11 |
-- |
Plug, Threaded |
| 1/2" |
00936-04 |
01195-02 |
01165-01 |
Plug, Threaded |
| 3/4" |
00936-01 |
01195-03 |
01165-02 |
Plug, Threaded |
| 1" |
00936-05 |
01195-04 |
01165-03 |
Plug, Threaded |
| 1-1/4" |
-- |
01195-05 |
01165-04 |
Plug, Threaded |
| 1-1/2" |
00936-02 |
01195-06 |
01165-05 |
Plug, Threaded |
| 2" |
00936-03 |
01195-08 |
01165-07 |
Plug, Threaded |
| Size |
Polypro
Part No. |
CPVC
Part No. |
Description |
| 1/4" |
-- |
01928-01 |
Elbow, 90 Degree, Threaded |
| 1/2" |
00682-02 |
01928-02 |
Elbow, 90 Degree, Threaded |
| 3/4" |
00682-03 |
01928-03 |
Elbow, 90 Degree, Threaded |
| 1" |
00682-06 |
01928-04 |
Elbow, 90 Degree, Threaded |
| 1-1/2" |
00682-08 |
01928-06 |
Elbow, 90 Degree, Threaded |
| 2" |
00682-04 |
019-28-07 |
Elbow, 90 Degree, Threaded |
| 3" |
00682-05 |
-- |
Elbow, 90 Degree, Threaded |
| Size |
PVC
Part No. |
CPVC
Part No. |
Description |
| 3/4"-1/2" |
-- |
03290-01 |
Reducer, Socket |
| 1"-3/4" |
01177-03 |
03290-02 |
Reducer, Socket |
| 1-1/2"-3/4" |
-- |
03290-04 |
Reducer, Socket |
| 1-1/2"-1" |
-- |
03290-05 |
Reducer, Socket |
| 2"-1" |
01177-07 |
-- |
Reducer, Socket |
| 2"-1-1/2" |
01177-02 |
03290-06 |
Reducer, Socket |
| Size |
Polypro
Part No. |
PVC
Part No. |
Description |
| 1/4" x 2" |
-- |
14386 |
Nipple, Threaded |
| 1/4" x C1 |
-- |
03793-02 |
Nipple, Threaded |
| 1/4" x 3" |
-- |
11102 |
Nipple, Threaded |
| 1/2" x 4" |
-- |
02396-02 |
Nipple, Threaded |
| 1/2" x C1 |
00684-02 |
02396-05 |
Nipple, Threaded |
| 1/2" x 6" |
01179-02 |
-- |
Nipple, Threaded |
| 3/4" x 6" |
01179-03 |
-- |
Nipple, Threaded |
| 3/4" x C1 |
00684-04 |
-- |
Nipple, Threaded |
| 1" x C1 |
00684-07 |
11130 |
Nipple, Threaded |
| 1" x 6" |
01179-04 |
-- |
Nipple, Threaded |
| 1-1/2" x 6" |
01179-06 |
-- |
Nipple, Threaded |
| 1-1/2" x C1 |
00684-05 |
-- |
Nipple, Threaded |
| 3" x 6" |
01179-10 |
-- |
Nipple, Threaded |
| 2" x C1 |
00684-03 |
-- |
Nipple, Threaded |
| Size |
Polypro
Part No. |
Description |
| 1/2" |
01172-01 |
Tee, Threaded |
| 3/4" |
01172-02 |
Tee, Threaded |
| 1" |
01172-03 |
Tee, Threaded |
| 1-1/2" |
01172-05 |
Tee, Threaded |
| Size |
CPVC
Part No. |
Description |
| 1/2"-1/4" |
03289-01 |
Reducer, Threaded |
| 3/4"-1/2" |
03289-02 |
Reducer, Threaded |
| 1"-1/2" |
03289-03 |
Reducer, Threaded |
| 1"-3/4" |
03289-04 |
Reducer, Threaded |
| 1-1/2"-1" |
03289-05 |
Reducer, Threaded |
| 1-1/2"-1-1/4" |
03289-06 |
Reducer, Threaded |
| 2"-1-1/4" |
03289-08 |
Reducer, Threaded |
| 2"-1-1/2" |
03289-09 |
Reducer, Threaded |
| 1-1/2"-3/4" |
03289-10 |
Reducer, Threaded |
| Size |
PVC
Part No. |
CPVC
Part No. |
Description |
| 1/4" |
01173-09 |
-- |
Tee, Socket |
| 1/2" |
01173-01 |
01166-01 |
Tee, Socket |
| 3/4" |
-- |
01166-02 |
Tee, Socket |
| 1" |
-- |
01166-03 |
Tee, Socket |
| 1-1/2" |
01173-05 |
01166-05 |
Tee, Socket |
| 2" |
01173-07 |
-- |
Tee, Socket |
| 3" |
-- |
01166-11 |
Tee, Socket |
| Size |
PVC
Part No. |
CPVC
Part No. |
Description |
| 1/4" |
-- |
01091-01 |
Union, Socket |
| 1/2" |
08801 |
01091-02 |
Union, Socket |
| 3/4" |
08802 |
01091-03 |
Union, Socket |
| 1" |
08803 |
01091-07 |
Union, Socket |
| 1-1/2" |
15004 |
01091-06 |
Union, Socket |
| 2" |
11585 |
-- |
Union, Socket |
| Size |
Polypro
Part No. |
Description |
| 1/2" |
01170-01 |
Union, Threaded |
| 1" |
01170-03 |
Union, Threaded |
| 1-1/4" |
01170-04 |
Union, Threaded |
| 1-1/2" |
01170-05 |
Union, Threaded |
| | | |
